Pull-up & pull-down
Step 1 tests every input and tells you which wire is held up, held down, or neither.
Introducing
Every sensor. Decoded.
Read
Six inputs, live over Bluetooth. Plug in, and every signal appears on your phone: clear, smooth, in real time.
Guide
AutoSimiX walks you through every measurement, from key on to 3000 RPM, then records two minutes of signal. Each step shows exactly where every probe goes.
Step 1 tests every input and tells you which wire is held up, held down, or neither.
Ground wires are found automatically and verified before the engine runs.
The 5 V or 12 V supply is detected and moved to A1, where the current is measured.
Read what the sensor draws at each step, and during the recording.
Reference
Every shared session builds a reference of real values, car by car and sensor by sensor. Your readings are compared with it, and anything unusual stands out.
The more people share, the sharper the reference becomes.
Emulate
Two outputs turn AutoSimiX into a signal source. Test an ECU, or a wiring harness, without the real sensor.
The app
Clear screens, big buttons, one step at a time. Everything you measure is saved, backed up and ready for your PC.





Made for
Spot a faulty sensor fast, compare it with real reference values, and keep a record of every car you test.
See what is really happening under your hood. The same tools, made simple.
Specs
Download the app and get ready to plug in.
Get it on Google PlayWorks with the AutoSimiX device · Android